Chandler Logo
Search


Home
Oil & Gas Logo
Chandler home banner
Products Service&Support Sales Team
Path: Home>Products>Reservoir Analysis>Model6100FormationResponse
Products & Services
Oil Well Cementing
     
Consistometers
     Compressive Strength
     Gel Strength
    • Gas Migration
     Mechanical Properties
     Fluid Loss
     Cement Viscosity
     Slurry Preparation
     Data Acquisition

Stimulation/Fracturing
     Atmospheric Rotational
     Pressurized Rotational
    • In-Line Viscometers
    • Friction Flow Loop
    • Formation Response
     Corrosion Apparatus

Reservoir Analysis
Core Flow/Core Flood:
    • Quizix Precision Pumps
    • Formation Damage
Phase Behavior:    
    • PVT Systems
    • Gasometer
    • Equilibrium Flash Separator
    • Viscosity
    • Sample Cylinder

Viscosity Testing
     Pressurized Rotational
     Atmospheric Rotational
     In-Line Viscometers
     Pipe Flow Vis/Conditioners   

Drilling Fluids Analysis 

Custom Products

Natural Gas Pipeline    
     Deadweight Testing
     Gas Chromatographs
     Gas Gravitometers
     Moisture Analyzers
     Dew Point Testers 




Model 6100 Formation Response

Model 6100 Formation ResponseA Critical Tool for Reservoir Analysis
The Model 6100 Formation Response Tester (FRT) is designed to accurately measure the permeability changes of a formation sample when exposed to a variety of test fluids. This highly flexible, easy to use system is capable of simulating nearly any well completion and stimulation schedule on a core sample. The unit is also capable of operating as a dynamic fluid loss tester with the optional Slurry Cart.

Designed for Flexibility and Reliability
The unique design of the Model 6100 allows fluids to be injected through a prepared core sample to simulate the flow of treating fluids or formation fluids. Core flow can be directed through three paths: forward, reverse and across the face. Up to five separate fluids can be controlled in any sequence through any flow path. The system is designed to handle acids and other corrosive fluids at temperatures up to 350ºF / 177ºC. An example of this flexibility is shown in the following test schedule. Reliability is designed into the Model 6100 to ensure many years of service. A custom stainless steel valve manifold contains all necessary flow paths. This significantly reduces the number of fittings, the maze of tubing, the fluid dead volume, and most importantly the number of potential leaks. Durable, air-operated valves with HASTELLOY® C-276 wetted parts can be quickly and easily replaced if needed.

Operational Simplicity
The Model 6100 is designed to be very user friendly both mechanically and in its software interface. The core holder pivots to ease insertion of a core sample or inspection of the holder. Once the core is loaded into the core holder, a confining pressure is applied to the Hassler Sleeve to seal the core. The technician then
programs or selects a flow schedule and a desired temperature before clicking on the “run” button to begin the test. Multiple pressure ports along the core allow monitoring the change in permeability as fluids invade deeper into the core as well as the determination of skin factors which may influence the testing results.

The software for the Model 6100 also performs the data acquisition. All channels are recorded with time and can either be outputted directly or exported in spreadsheet format. The recorded data includes the measured and calculated values selected by the user. Upon test completion, an automated cleaning cycle can be run to prepare the system for the next test.


Ph: (918) 250-7200 ~ email: chandler.sales@ametek.com ~ 2001 N Indianwood Ave, Broken Arrow, OK 74012
about us - news & events - service & support sales team - contact us - ametek
©Copyright 2011 AMETEK, Inc. All Rights Reserved
privacy policy - trademarks - sitemap
Terms and Conditions of Sale -  Terms and Conditions of Purchase